Kverneland Optima TFprofi

Trailed frame - low pulling force with maximum output

The Optima TFprofi presents the perfect combination of high performance and reduced tractor power requirement. The hydraulic folding trailed frame with eight HD rows comes together with a 2,000 litre fertiliser hopper.

The Optima TFprofi is either equipped with a hydraulically or mechanically driven fan and can be operated even by a tractor of 80hp only. No lifting power is required.

The fertiliser hopper can easily be filled with a front loader, big bags or as an option by filling auger. Different fertiliser coulters are available. As an option the fertiliser application can be driven electro-hydraulically.

The Advantages:

  • Compact and clear design
  • Low power requirement
  • High performance up to 5ha/per hour
  • Well-proven seeding unit with a large choice of tooling
  • Convenient coupling and great manoeuvrability
  • Compact and fast on the road

Technical Specifications

Working width/transport width  6m/2.98m 6.4m / 3.4m  
Number of rows 8 HD sowing units 8 HD sowing units  
Row width (cm) 70/75 80  

Optima TF profi - Frame

The trailed, foldable frame with either six or eight rows can be equipped with a 1340l fertiliser hopper. The Optima TFprofi is very compact in transport position.

HD-II sowing unit

For mulch and conventional sowing

  • The heavy basic weight of the sowing unit together with the possibility to add additional pressure (up to 100kg) onto each individual sowing unit via the optional spring loaded system allows optimum depth control even unter extreme conditions.
  • Effective ground contour following, due to the large lateral depth control wheels (Ø 400mm, width 120mm), precise seed placement and seed covering by means of the intermediate press wheel and the multi adjustable V-press wheel, ensure maximum field emergence.
  • The sowing unit Optima HD can be mounted on all Optima frames (3-point linkage or trailed).

Seeding Heart Optima

Seeding heart without seals

  • The patented seeding heart by Kverneland has reduced maintenance costs to a minimum
  • No friction, no wear, low drive torque, minimum maintenance: The seed disc rotates in the seeding heart together with the vacuum chamber. This seeding drum is connected to the vacuum fan via a hollow shaft
  • This seed heart principal results in no loss of vacuum, and therefore a low vacuum requirement

Optima e-drive / e-drive II

e-drive/e-drive II – complete control and monitoring of the machine from the tractor cab in accordance with ISOBUS standard

  • With e-drive/e-drive II, each sowing unit is driven individually via an electric motor.
  • The low-maintenance drive is connected directly to the seeding heart via a toothed belt in an encapsulated dust proof housing.
  • This enable an extremely compact design and smooth drive characteristics with low current consumption
  • All the data is entered and read out via an ISOBUS terminal like IsoMatch Tellus PRO or Tellus GO.
  • The sowing distances are infinitely adjustable and can be changed during sowing.
  • All the sowing units can be switched off individually.
  • In conjunction with “close row” sowing widths of 37.5cm a further benefit of the e-drive/e-drive II comes into play: Individual tramline switching. Tramlines can be set up for any spray width.
  • The e-drive/e-drive II features complete electronic monitoring of all machine functions including seed monitoring via an opto sensor.

Optima TFprofi - Fertilizer Placement

The new fertiliser hopper has a capacity of 2,000l. The wide opening of nearly 3m enables the filling with front loader or big bags. An optional filling auger is also available.

The dosing units can, as an option, be driven electro-hydraulically. This is controlled and monitored via ISOBUS. The electro-hydraulic drive of the metering device enables constant adaptation of the application rate during work (as well as via application charts with GEOCONTROL). In addition the exact switching on/off at headlands is also possible. 

The fertiliser dosing is done by two quad outlet dosing units. Each row comes with its own air support to ensure the steady conveyance of high amounts of fertiliser especially when working on hillsides.

Another option is that the fertiliser hopper can be placed on 4 weigh cells for a constant control and monitoring of the application rate. Prior to operation, the amount of fertiliser required for the job can be filled into the hopper and can be adjusted to what is really needed.

For contractors whose machines work for several customers, a further advantage is the possibility to invoice the fertiliser used accurately to the kilogram.


IsoMatch GEOCONTROL - Cost saving with immediate payback 

Seeding with GPS and GEOCONTROL in combination with an electric driven precision drill is a major step towards precision and cost saving. These machines are all equipped with ISOBUS technology which with the help of the IsoMatch Tellus terminal, can be easily controlled. 

Each electric driven seeding element, in combination with GPS and GEOCONTROL, is automatically switched on or off in exactly the right place, ensuring there is no overlap with any row that has already been seeded. This is especially handy in triangular fields, on curved or irregular shaped headlands. 

More information about ISOBUS Intelligence

ISOBUS Intelligence - GEOSEED - Optima

GEOSEED - Precision at high end

GEOSEED is offered in two different levels:

GEOSEED Level 1 is the synchronization in the machines working width. This improves the distribution of seeds up to perfection in parallel or diamond pattern: Positive effects are the best use of nutrients, water and sun. Also the wind and water erosion is decreased.

GEOSEED Level 2 is the synchronization in the whole field. This is the necessary requirement for interrow cultivation, also across the seeding direction. GEOSEED is the only system in the world, that makes this mechanic weeds control possible!

Spørg Kverneland